FAQ
Lubbock Concrete Questions, Answered
Lubbock True Concrete answers the questions South Plains homeowners ask most about cost, permits, soil, weather and hiring.
Cost
01What do driveways cost per square foot?
National cost guides put a plain broom-finish driveway at about $6 to $12 per sq ft installed, and stamped work at about $12 to $25. Lubbock prices come from local quotes. See the Lubbock concrete cost guide.
02How much concrete does a slab take?
At 4 inches thick, one cubic yard covers about 81 sq ft. A 24 by 24 garage slab (576 sq ft) needs about 7 yards before thickened edges and waste. See concrete slab cost.
03What does tearing out old concrete cost?
National guides put removal at about $2 to $6 per sq ft, with rebar-reinforced slabs at the high end. It is priced on top of the new pour.
Permits and Rules
01Does a driveway or patio need a Lubbock permit?
Inside the city, private driveways and sidewalks on your own lot generally need no permit unless they are over 30 inches high, over a basement, or extend beyond your property line. Anything in the street right-of-way needs a construction permit.
02What about the driveway approach?
The approach between the street and your property line is public right-of-way. The City of Lubbock requires a construction permit before it is built, repaired or replaced, and a residential approach must be at least 10 feet wide at the property line.
03I live outside city limits. Who issues permits?
Unincorporated Lubbock County does not issue general building permits, but a culvert or other structure in county road right-of-way needs a free permit from county Public Works. Towns like Wolfforth and Ransom Canyon have their own rules; call city hall.
Building It Right
01How thick should a driveway be?
Lubbock's standard details set 4 inches as the minimum for driveways and sidewalks. Trucks, trailers and RVs justify more; the contractor designs to the load.
02What is caliche and does it matter?
Caliche is a hard calcium-carbonate layer common in South Plains soils. It can slow digging for footings and can trap water near the surface, so drainage and base prep matter. Ask what the contractor expects at your address.
03How do contractors handle Lubbock wind?
Wind and low humidity dry fresh concrete fast. Early starts, wind breaks, evaporation retarders and prompt curing help. Ask what the plan is for a windy pour day.
04Can concrete be poured in winter?
Yes, with protection. January lows average about 27°F, so contractors use blankets, warm water or accelerators and avoid pouring ahead of a hard freeze.
Hiring a Contractor
01Who actually does the work?
An independent local concrete contractor. Lubbock True Concrete is a referral service: we pass your request along, and the contractor agrees terms with you directly and is responsible for the work, permits, pricing and warranty.
02Do Texas concrete contractors need a license?
Texas has no statewide license for concrete or general contractors. The City of Lubbock requires general contractors to register and carry $100,000 in liability insurance or a $20,000 bond. Ask for proof of insurance.
03Can I cancel after signing?
The FTC Cooling-Off Rule lets you cancel many sales of $25 or more made at your home within three business days. Read the contract's cancellation terms before signing.
Free to request
Get quotes from local concrete contractors
Tell us the town, the job (driveway, slab, patio, repair) and a rough size. We pass your request to an independent concrete contractor who works in your area. They contact you, look at the site and give you a written quote. You hire and pay them directly.
- 1Your request goes to a contractor who works in your town.
- 2They call or email, see the site and quote in writing.
- 3You choose. Hire and pay the contractor directly.